Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Brewery Wastewater Treatment System Relies on BJM SXF Fahrenheit® Pumps

Industrial Flow Solutions
IFS Brewery Wastewater Treatment System Relies on BJM SXF Fahrenheit® Pumps

Brewery Wastewater Treatment System Relies on BJM SXF Fahrenheit® Pumps

The Brewers Association recently reported that the craft brewing industry has grown an average of 10.9% over the last decade. With burgeoning enthusiasm from consumers, it’s no surprise that breweries are expanding their operations to meet the increase in demand. Expanding operations successfully means implementing reliable equipment.  

After meeting at the Craft Brewers conference, a successful brewery collaborated with ClearBlu Environmental, a full-service design-build firm that specializes in applying sustainable technologies to process wastewater treatment and reclamation. Since their business was growing rapidly, the brewery wanted to expand their operations in Blanco, Texas. Instead of working with separate engineering and construction companies, the brewery hired ClearBlu Environmental because they had the ability to design and build the entire system from end-to-end, implementing custom solutions to meet their specific needs.

BJM PumpsAn efficient treatment system was required to process the wastewater generated by the brewery. ClearBlu Environmental designed the pretreatment system, which included screening, settling, and ph balancing, as well as the pond design, aeration system, bacterial treatment, and final-stage flow monitoring. It was determined that three lift stations would need to be installed, with two pumps to operate in each lift station. Robert Bixby, President of ClearBlu Environmental, considered three main challenges before selecting submersible pumps for the primary lift station:

Acidic Wastewater – with a PH of 4, the brewery’s wastewater was highly acidic. The majority of submersible pumps are made from cast iron material, which would not last in a highly acidic environment.

High Temperatures – the brewery’s wastewater was consistently over 140 degrees Fahrenheit; most submersible pumps cannot withstand pumping liquids at temperatures higher than 104 degrees Fahrenheit.

Effective Handling of Solids – as with any brewery or winery, the wastewater contains solids that could potentially erode pump components or clog the pumps, thereby reducing pump reliability and risking operational delays.

BJM PumpsBixby selected two BJM Model SX22CSS-F submersible pumps to be installed in a duplex arrangement within the cylindrical fiberglass primary lift station. “You need reliable pumps, especially in a primary lift station where you have issues with solids, settling, acidity, and temperature – it was well worth it to use special pumps from BJM,” explains Bixby.

The BJM Model SX22CSS-F submersible pumps were the best solution for handling the brewery’s wastewater for the following reasons:

  • BJM PumpsManufactured from durable 316 Stainless Steel, these submersible pumps are designed to operate in highly acidic and corrosive environments.
  • The SXF Series pumps are engineered to pump hot liquids up to temperatures of 200 degrees Fahrenheit.
  • The SX22CSS-F pumps utilize non-clog, single vane impellers designed to pass solids while delivering high volume of liquid and optimal lift performance.
  • Designed to be wear-resistant, all parts exposed to the hot pumped liquids are made of 316 Stainless Steel, including all wear and “wet” parts such as impeller, wear-plate, oil housing, pump-housing and inner pump top.
  • Engineered for reliability, BJM provides “Three Seal Motor Protection”. Double mechanical seals protect the motor; the lower seal is made of silicon carbide/silicon carbide and the upper seal is made of carbon/ceramic. An additional lip seal is installed above the impeller to help prevent abrasives from entering the seal chamber.
  • For additional motor protection, these pumps utilize winding protection and (NEMA) Class R motor insulation with a thermal cut-out switch that allows the stator to have a winding temperature of up to 300 degrees F (150 C), which is superior to pumps with Class A and B insulation.

Since their installation in June 2013, the BJM submersible pumps have performed reliably, operating at 460 volts and pumping up to 200 gallons per minute. Flow control within the system helps regulate the amount of brewery wastewater that travels to the small town’s wastewater treatment plant, ensuring the flow is spread out evenly over a 24-hour period. The lift stations have been kept clear of settled solids and have not overflowed due to the BJM pumps’ reliable performance.

About BJM Pumps (by Industrial Flow Solutions)

BJM Pumps®, a product series by Industrial Flow Solutions. Headquartered in New Haven, Connecticut, BJM Pumps have been successfully installed in thousands of industrial and municipal fluid handling applications since 1983. Industrial Flow Solutions supplies world class pumps and accessories, priced competitively, through its network of stocking distributors.

About ClearBlu Environmental

ClearBlu Environmental is a company that focuses on applying sustainable technologies to process wastewater treatment for discharge or water reclamation. Divisions include manufacturing, systems integration, system installation and system service. ClearBlu manufactures screening, pH balancing, and biodigester systems and builds complete treatment systems emphasizing aerobic digestion.

Related Articles

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact