Empowering Pumps and Equipment

Pump and Mechanical Seal Principles
2018-11-27 08:00 - 2018-11-30 17:00 (America/Chicago) | Irving TX, 4343 West Royal Lane Suite 106, Irving, TX, 75063, United States
This course provides the participants with the knowledge and skills needed to understand the basics of pumps, pumping systems and mechanical seals. The course curriculum is centered on centrifugal pumps and the mechanical seals that they utilize in common industrial applications.
Basic pump and mechanical seal composition and operation are discussed in the classroom, and then reinforced in the laboratories using actual pumps equipped with instruments to indicate flow, pressure, temperature, and power consumption. The pumps are operated by the students themselves. 65% classroom, 35% labs.
Specific topics include:

Pump designs
Basic pump system hydraulics
Centrifugal pump performance curves
NPSH and cavitation issues
Types of centrifugal pumps
Pump impeller design
Mechanical seal basics
Seal chamber designs
Mechanical seal materials of construction
Seal installation procedures
Mechanical seal piping plans
Common seal support systems

AUDIENCE
Engineers; individuals involved in pump sales and service, and experienced plant maintenance and operational personnel that have a desire to improve their understanding of pumps and mechanical seals.

Valve World Expo Dusseldorf 2018
2018-11-27 08:00 - 2018-11-29 17:00 (America/Chicago) | Fair ground Düsseldorf, Düsseldorf, Germany
Innovation platform, industry meeting point, trend barometer: Also in 2018,VALVE WORLD EXPO is once again the world’s leading trade fair for industrial valves. With the VALVE WORLD EXPO CONFERENCE and PUMP SUMMIT 2018, two further attractive visitor magnets are again integrated into the trade fair concept.
Come to VALVE WORLD EXPO: The place to be in 2018

Engineered Overhung Pump Repair (formerly SSPR)
2018-11-21 08:00 - 2018-11-23 17:00 (America/Chicago) | Desio, Italy
A Basics Level course for maintenance staff. This course will provide participants with the knowledge and skills needed to evaluate failure modes and repair API 610 overhung process pumps. The course is comprised of approximately 40 percent classroom and 60 percent laboratory time. Concepts and theory are taught in a classroom setting and then reinforced with hands-on exercises. Working in teams, participants will disassemble, inspect, and determine failure modes for a variety of API 610 overhung pumps. Classroom texts and equipment are generic to all OEMs’ hardware.
AUDIENCE
This course is for mechanics, millwrights and others who are responsible for maintaining API 610 overhung process pumps.

Waterhammer issues and surge suppression
2018-11-19 10:00 - 11:00 (America/Chicago) | Webinar
The nature of dealing with waterhammer issues often does not involve a black and white approach. Effectively analyzing waterhammer model results is very much of an art as well as a science. Come and learn some useful analysis techniques to ensure you are understanding your waterhammer results correctly.

Register here.

Engineered Sealing Systems
2018-11-19 08:00 - 2018-11-21 17:00 (America/Chicago) | John Crane Training Centre – Western Australia, 1/17 Baile Road Perth, Canning Vale, Perth, 6155, Australia
This instructor-led course introduces the basic principles of mechanical seals and seal support systems. Learning is through an effective blend of classroom theory sessions and practical, hands-on exercises. The course includes appropriate assessments on theory and practical elements. A certificate is issued to delegates on successful completion of the course.
Note: This is the first part of a two-course program; the second course is Advanced Mechanical Seals and Systems.
Learning Objectives
This training course is intended to meet the learning needs of end-user/OEM/contractor personnel working with rotating equipment, such as centrifugal pumps used in process industries.
Key objectives of the course include:

Understand the fundamental principles of mechanical seals and support systems used in rotating equipment
Provide opportunities for hands-on experience with mechanical seal assembly and installation
Understand and be able to apply the latest sealing technology used on process applications
Be able to comply with relevant industrial shaft sealing standards
Be able to adopt safe working practices at all times when working with mechanical seals and support systems
Understand the importance of mechanical seal performance for overall process plant reliability
Understand the consequences of any seal leakage

Intended Audience (Industry/Role)
This course is directly relevant to those working in process plants using rotating equipment fitted with mechanical seals and associated support equipment — particularly including industries such as oil and gas, petrochemical, power generation, pharmaceutical, and waste and water treatment.
The course is aimed at end-user plant personnel responsible for the installation, operation, maintenance and reliability of rotating equipment, including those working in management, engineering, operations and technician roles.
The course is also relevant to those working in rotating equipment OEMs and as process plant contractors.
Registration Open Until Monday 5 November, 2018 12:00 PM (EST)

Fugitive Emissions Course
2018-11-14 09:00 - 17:00 (America/Chicago) | Royal Sonesta Houston Galleria Hotel, 2222 West Loop South, Houston, TX, 77027, United States
Wednesday, November 14, 2018 – 9:00AM – 5:00PM
Royal Sonesta Houston Hotel, Houston, Texas
Register now
Topics to be covered:

The history of fugitive emissions testing
Terms and definitions
Industry practices and implementation
Types of equipment
Manufacturing process improvements
Packing Manufacturer’s Fugitive Emission “Best Available Control Technology (BACT)”
Improvements for the future
Problems, installation and maintenance

Ideal participants:

Professionals looking for a generalized outline of fugitive emissions testing, standards and related topics
Anyone looking to renew and update their knowledge base on this subject
Anyone interested in expanding their understanding of LDAR, EPA requirements and testing procedures, and equipment used in mitigating fugitive emissions
New professionals in the valve industry without a technical or engineering background

Attendees receive:

Certificate of completion
Lunch, snacks and drink
Print copy of Valve World Americas journal
Digital subscription to Valve World Americas journal
Valve Essentials and Fugitive Emissions Workbooks with notes from the courses

Additional information:
The cost to attend each one-day session, which run from 9:00AM to 5:00PM, is $499 USD
Deadline for registration: Friday, November 9th, 2018

Managing Aging Plants USA 2018
2018-11-13 10:00 - 2018-11-14 16:00 (America/Chicago) | Royal Sonesta Houston Galleria Hotel, 2222 West Loop South, Houston, TX, 77027, United States
The 2018 Managing Aging Plants USA will be held from November 13th to 14th, 2018 at the Royal Sonesta Houston Galleria Hotel in Houston, Texas. The aim of this dynamic event is to create a community dedicated to operating aging infrastructure safely & efficiently through the use of materials, inspection methods, best practices, etc.
The conference
Mr. Kenneth Kirkham, Principal Engineer with E²G| The Equity Engineering Group, Inc., is the Conference Chairman and he will develop an in-depth conference program alongside the Vice-Chairman Mr. Cody Kell, a Materials Engineering Specialist with 3M, and a steering committee made up of esteemed representatives from companies such as Air Liquide, AkzoNobel, Albemarle, Fluor, Suez, etc.
The conference schedule will consist of keynote lectures, presentation sessions, and workshops focusing on a variety of relevant topics such as:
Managing Aging Infrastructure
Counterfeit Materials
Damage Mechanism Reviews
Integrity Operating Windows
Life Extension
Maintenance & Repairs
New Problems in Aging Plants
New Technology for Managing Old Plants & Problems
Piping Inspection & Reliability
Remaining Life Assessment
Risk-Based Inspection (RBI)
Testing Technologies
Upgrading Existing Assets
Management Challenges
Age & Gender Gaps in the Engineering Sector
Asset Integrity
Impact of Regulations
Increasing Efficiency
Knowledge Transfer
Managing an Aging Workforce
Reliability & Aging Assets
Training the Next Generation
Corrosion Resistant Alloys/Materials
Availability of Old Alloys & Compatibility with New Alloys
Duplex Stainless Steel
Failures & Solutions
Hydrogen Reformer Alloys and Problems
New Alloys to Solve New Problems
New Alloys to Solve Old Problems
Process Licensors Using Alloys to Solve Corrosion Problems
Reactive Metals
Sulfuric Acid Manufacturers Using Alloys to Extend Life
Worldwide Sourcing
The exhibition
Running alongside the conference is the exhibition, which will showcase the latest products and solutions for the processing, manufacturing, machinery, repair, and maintenance sectors.
There will be ample opportunities to meet and network with professionals specializing in procurement, production, maintenance, operations, and plant management. The exhibition will bring together end-users, buyers and specifiers from a variety of industries including oil & gas, chemical & petrochemical, power generation, etc.
Please view the 2018 floor plan here.

Valve Essentials Course
2018-11-13 09:00 - 17:00 (America/Chicago) | Royal Sonesta Houston Galleria Hotel, 2222 West Loop South, Houston, TX, 77027, United States
Tuesday, November 13, 2018 – 9:00AM – 5:00PM
Royal Sonesta Houston Hotel, Houston, Texas
Register now
Topics to be covered:

Basic introduction to flow control
Quarter-turn valves – including ball, plug and butterfly valves
Common design features – such as end connections, gaskets, bonnets, stems, stem seals, seats, backseats and trims
Self-acting valves – such as check valves
Multi-turn valves – including gate, globe, needle, pinch and diaphragm valves
Valve Applications – such as oil & gas production and transportation, refining, LNG, power generation, chemical processing and utility lines
Topics relating to valve ratings, materials, testing and more
Problems, installation and maintenance

Ideal participants:

Professionals looking for a generalized outline of valve systems and equipment
Anyone looking to renew and update their knowledge base on this subject
Valve distributors and manufacturers’ sales representatives looking to expand their understanding of the products
New professionals in the valve industry without a technical or engineering background

Attendees receive:

Certificate of completion
Lunch, snacks and drink
Print copy of Valve World Americas journal
Digital subscription to Valve World Americas journal
Valve Essentials and Fugitive Emissions Workbooks with notes from the courses

Additional information:
The cost to attend each one-day session, which run from 9:00AM to 5:00PM, is $499 USD
Deadline for registration: Friday, November 9th, 2018

Pump System Analysis
2018-11-13 08:00 - 2018-11-16 17:00 (America/Chicago) | Irving TX, 4343 West Royal Lane Suite 106, Irving, TX, 75063, United States
This course provides a comprehensive analysis of pump performance and its dependency on operations upstream and downstream from the pump. Students will review pump hydraulics and apply these fundamentals to calculate the reliability of the overall pump system. 60% classroom, 40% labs and team exercises.
Specific topics include:

Calculating friction head losses.
Calculating total dynamic head
Reviewing system head curves for in-line and branch-line systems.
Comparing parallel vs. series operation.
Variable speed control vs. valve throttling.
Calculating NPSH available.
Pump selection recommendations.
Calculating specific speed and suction specific speed.

AUDIENCE
Engineers; rotating equipment specialists; individuals involved in pump sales and service, and experienced plant maintenance and operational personnel that have a desire to improve their understanding of pumping systems and the ways those systems can be improved.

Pump and Mechanical Seal Basics
2018-11-13 08:00 - 2018-11-14 17:00 (America/Chicago)
This course provides participants with the knowledge and skills required to understand the basics of pumps and mechanical seals. The course details the components of pumps and mechanical seals, and their functions, how they work together, and what they need to operate reliably in a system. Designed as an on-site course, concepts and theory are taught in a classroom setting and then reinforced with hands-on exercises using portable laboratories. 80% classroom, 20% labs.
Specific topics include:

Introduction to pump terms and definitions
Construction of the pump and the function of each pump component
Basic hydraulics regarding liquid flow and head in a system
Centrifugal pump performance curves.
Net Positive Suction Head and various types of cavitation
Mechanical seals – designs and components
Single and dual mechanical seals and why they are used
Common mechanical seal piping plans and why they are used

AUDIENCE
Engineers; individuals involved in pump sales and service, and experienced plant maintenance and operational personnel that have a desire to improve their understanding of pumps and mechanical seals.

Dry Gas Seal Seminar (1-Day)
2018-11-13 08:00 - 17:00 (America/Chicago) | Pasadena, TX, 4015 flowserve way, Pasadena, TX, 77503, United States
This seminar introduces principles of dry gas seals and seal support systems for centrifugal compressors and rotating equipment. Topics include an Overview of the History of Gas Seals, Principles of Operation, Seal Arrangements & Types, and Troubleshooting.

Learning Objectives
This training course is intended to introduce the design and application of dry gas seals to end-user/OEM/contractor personnel working with turbomachinery such as centrifugal compressors used in process industries.
Key objectives of the course include:

Recall of the fundamental principles of dry gas seals and support systems used in turbomachinery
Describe dry gas seal capabilities (static and dynamic)
Explain critical design and installation considerations
Review of materials and constructions
Identify and describe control system design and functionality
Classify typical failure modes for a dry gas seal

Intended Audience (Industry/Role)
This course is directly relevant to those working in process plants using turbomachinery rotating equipment fitted with dry gas seals and associated support equipment — particularly including industries such as oil and gas, petrochemical and power generation.
The course is aimed at end-user plant personnel responsible for the installation, operation, maintenance and reliability of turbomachinery, including those working in management, engineering, operations and technician roles.
The course is also relevant to those working in rotating equipment OEMs and as process plant contractors.
Dates and Registration
View Dates, Location, Price and Registration Here

Pulsation Control - AFT Impulse Pulsation Frequency Analysis (PFA)
2018-11-07 10:00 - 11:00 (America/Denver) | Webinar
Acoustical frequency analysis has always been a very well-kept secret by specialized companies; AFT Impulse’s Pulsation Frequency Analysis (PFA) Module will give AFT Impulse users a comprehensive access to this technology. Join us in this webinar and learn how to use this new powerful tool.
Register here.

Centrifugal Pump Fundamentals
2018-11-06 08:00 - 2018-11-09 17:00 (America/Chicago) | Desio, Italy
This course provides the student with a thorough understanding of centrifugal pump design, function and operation. Common process control and performance measurement methods are reviewed, and the necessary calculations associated with pumping systems are executed and explained.
Centrifugal pump issues are discussed in the classroom and then reinforced in the laboratories using actual pumps equipped with instruments that indicate flow, pressure and power consumption as the pumps are operated by the students themselves. 65% classroom, 35% laboratory.
Specific topics include:

Pump components and nomenclature.
PD pumps vs. Centrifugal pumps.
Centrifugal pump types.
System hydraulics
Centrifugal pump curves.
Affinity Laws.
NPSH and types of cavitation.
Viscosity impact on performance.
Power
Specific Speed
Suction specific speed.

AUDIENCE
Engineers; rotating equipment specialists; individuals involved in pump sales and service, and experienced plant maintenance and operational personnel that have a desire to improve their understanding of centrifugal pumps and their proper operation.

Between Bearing Pump Repair (formerly MSPR)
2018-11-06 08:00 - 2018-11-09 17:00 (America/Chicago) | Pasadena, TX, 4015 flowserve way, Pasadena, TX, 77503, United States
An Intermediate Level class for maintenance staff.
This course instructs participants on the proper procedures for the preparation, rigging, disassembly, inspection and failure analysis of between bearing centrifugal pumps. The pumps addressed include both horizontally and radially split pumps; i.e BB1 through BB5 style equipment.
During the course the participants will:

Discuss field and shop inspection of the pump and system components
Practice disassembly and inspection procedures and best practices
Document and analyze information gathered during disassembly and inspection
Identify and discuss elimination of failure modes
Review industry standards for component NDE and repair techniques
Practice bearing and seal removal and installation
Discuss industry standards and criteria for component balancing
Reassemble pumps with an emphasis on measuring and recoding critical dimensions and runouts

AUDIENCE
This course is for mechanics, millwrights and others who are responsible for maintaining between bearing pumps.

Mechanical Seal Fundamentals
2018-11-06 08:00 - 2018-11-09 17:00 (America/Chicago) | Irving TX, 4343 West Royal Lane Suite 106, Irving, TX, 75063, United States
This course provides the student with foundational information regarding the purpose of mechanical seals, how they are constructed, where they are used, and what they need to effectively perform in a wide variety of applications. Mechanical seal issues are discussed in the classroom and then reinforced in the laboratories using actual pumps equipped with instruments to indicate seal chamber pressure and temperature as the pumps are operated at various flow rates by the students themselves. 70% Classroom, 30% labs.
Specific topics include:

Pump and mechanical seal basics.
Seal function (how they work).
Mechanical seal piping plans.
Proper seal installation and removal.
Mechanical seal types and arrangements.
Reading mechanical seal drawings.
Materials of construction.
Fluid properties effect on seals.

AUDIENCE
Engineers; rotating equipment specialists; individuals involved in pump sales and service, and experienced plant maintenance and operational personnel that have a desire to improve their understanding of the many mechanical seal applications in rotating equipment.

Pump And Mechanical Seal Reliability
2018-10-30 08:00 - 2018-11-02 17:00 (America/Chicago) | Irving TX, 4343 West Royal Lane Suite 106, Irving, TX, 75063, United States
This course provides the participant a better understanding of the reliability issues related to the interrelated functions of the centrifugal pump and mechanical seal, as they are operated in a complex pumping system under a variety of conditions. Participants learn how to identify and address causes of poor pump and mechanical seal reliability by focusing on mechanical and operational issues that can negatively affect pump and seal performance.

Basic pump and mechanical seal issues are discussed in the classroom, and then reinforced in the laboratories using actual pumps equipped with instruments to indicate flow, pressure, temperature, and power consumption. The pumps are operated by the students themselves. 60% classroom, 40% labs.
Specific topics include:

Review of centrifugal pump basics
Pump operating conditions that affect both pump and seal reliably
Mechanical issues that affect pump and seal reliability
Troubleshooting centrifugal pump failures
The effects of the various types of cavitation in a mechanically sealed pump.
The importance of proper clearances in a centrifugal pump.
Review of mechanical seal basics
Mechanical seal installation, commissioning and operation
Detailed steps to mechanical seal troubleshooting
Seal failure case studies

AUDIENCE
This course builds upon level 1 pump and mechanical seal courses. Experienced operations and maintenance personnel and engineers with at least 1 or more years of field experience are preferred.

Pump and Mechanical Seal Principles
2018-10-30 08:00 - 2018-11-01 17:00 (America/Chicago) | Angleton, TX, Angleton, TX, United States

Pump Operator Training
2018-10-30 08:00 - 17:00 (America/Chicago) | Beaumont, TX, Beaumont, TX, United States
The purpose of this course is to teach principles and procedures that are necessary to optimize centrifugal pump and mechanical seal life through proper equipment operation. Participants will identify common causes of rotating equipment failure and discuss how they could be corrected or even prevented through proper operating procedures.
Designed as an on-site course, concepts and theory are taught in a classroom setting and then reinforced with hands-on exercises using portable laboratories.
Specific topics include:

Review of centrifugal pump basics.
Pump operating conditions that affect reliably.
Mechanical issues that affect pump reliability.
Troubleshooting centrifugal pump failures.
Review of mechanical seal basics.
Mechanical seal installation, commissioning and operation.
Mechanical seal troubleshooting.
Seal failure case studies.

AUDIENCE
All people or supervisors involved with the routine operation of mechanically sealed rotating equipment. Others who would benefit include engineers and personnel responsible for the reliability of rotating equipment.

Valve Basics Seminar & Exhibits
2018-10-30 07:00 - 2018-11-01 17:00 (America/Chicago)
A 3-DAY COURSE: VALVES, ACTUATORS & CONTROLS 101 – PASADENA, TX
Hosted by the Valve Manufacturers Association, the Valves, Actuators & Controls 101 training course features 15 individual lessons along with a hands-on learning experience that focuses on products covered in the classroom portion of the program.
Learn more: bit.ly/VMAvalvebasics

Compressor Station Vibration and the Impact on Performance, Cost and Reliability
2018-10-29 08:00 - 2018-10-31 17:00 (America/Chicago) | Fort Worth, TX, Fort Worth, TX, United States
Hands-on Training

This workshop focuses on vibration issues affecting compressor stations, including piping systems. Participants will gain a hands-on understanding of vibration issues and solutions at the design stage, as well as during commissioning and troubleshooting. Discussion topics include the impact of equipment selection, operation, and piping layout on pulsation, vibration, and performance.
This course is recommended for technicians and engineers involved in compressor design or troubleshooting, including rotating specialists, design staff, and field engineers.
Using a series of interactive case studies, the class will role play and make decisions based on various real-world scenarios. The program incorporates detailed computer modeling to make the scenarios realistic by including actual pulsation and vibration outcomes.
Attendees will actively participate in designing pulsation control and identifying support locations using tools provided by the presenters. An overview of torsional vibration and its impact on the design process will also be provided.
Each participant will receive a comprehensive workbook, a valuable resource that will provide benefits long after the completion of the class. Breakfast, lunch, and refreshment breaks provided.

Course content includes:

Compressor Design Process to Improve Reliability
Vibration Overview
Compressor Operation and Performance and Their Impact On Vibration
Pulsation Analysis Throughout the Piping System
Mechanical Resonance in the Piping, Skid and Foundation
Torsional Vibration
Small Bore Piping
Piping Layout Considerations
Overview of Centrifugal Compressor Vibration Issues

More on mitigating surge issues with AFT Impulse
2018-10-24 10:00 - 23:00 (America/Denver) | Webinar
Learn how to model and simulate surge issues in AFT Impulse such as: check valve slamming, proper relief valve modeling, and correctly use gas accumulators to suppress surges. Learn how to model and simulate surge issues in AFT Impulse such as: check valve slamming, proper relief valve modeling, and correctly use gas accumulators to suppress surges.
Register Here.

2018 Assembly Show
2018-10-23 08:00 - 2018-10-25 17:00 (America/Chicago) | Donald E. Stephens Convention Center, ROSEMONT,, IL, United States
The ASSEMBLY Show is gathering together the manufacturing industry for its sixth annual event this year and has just announced the details for the 2018 education program. The show will offer Learning Theaters on the show floor which will give attendees a chance to increase their knowledge on assembly technology from leading subject matter experts as well as from a keynote speaker, pre-event workshops, networking events and much more. The ASSEMBLY Show is a three-day trade show and conference focused exclusively on assembly technology, equipment and products taking place at the Donald E. Stephens Convention Center in Rosemont, IL from Tuesday, October 23 to Thursday, October 25, 2018.

“For six years, we have worked with industry experts and our exhibitors to craft educational programs which provide professionals in the manufacturing industry a chance to learn about the latest innovations, tools and methods available,” said Tom Esposito, Publisher, ASSEMBLY Magazine. “This year we are especially excited for our educational program which will focus on automation, robotics, Industry 4.0 and we are confident attendees will benefit from the sessions with expert speakers and workshops.”

During the event on Wednesday and Thursday participating companies will have subject matter experts present in the Learning Theaters on topics including:

Join the IO-Link Revolution! It Will Make & Save You Money! presented by Balluff, Inc,
Why I Chose Battery-Free AGVs for a High Volume Assembly Line presented by RedViking
How to Accelerate the Transformation to Industry 4.0 as it Relates to Assembly Products presented byDesoutter Industrial Tools
Parts Feeding 101 for Robot Automation: Flexible Feeding and More presented byEpson Robots
Ingress Leak Testing – Protecting Products from their Environment Presented by LACO Technologies
Industry 4.0 – Key Features for a Successful Digital Transformation presented by Rexroth Corporation
Eliminate FDA Software Validation for Production Line Data Exchangepresented by elliTek, Inc.
A Logical Path to a Smart Factory presented by Visual Knowledge Share, Ltd.
Getting Lean with AGV’s in Assembly and Manufacturing presented by Jervis B Webb Company, a Division of Daifuku North America
How Intelligent Robotic Automation Can Improve Your Bottom Line presented by FANUC America Corporation
Implementing Digital Factory Transformation in 73 Easy Steps presented byUbisense
The Third Wave of Manufacturing Automation presented by Real Time Automation

In addition, industry leaders from Henkel, Sturtevant Richmont, Mountz, and Go&Up Automation will also present in the learning theaters. For updated information on the sessions, visit, http://www.theassemblyshow.com/index.php/about-the-show/agenda

This 6th Annual ASSEMBLY Show will bring together 8,000 industry professionals with nearly 300 exhibiting companies and will be full of opportunities for manufacturing engineers and managers to uncover new resources, experience equipment hands-on, evaluate the latest technologies and products and connect face-to-face with industry experts.

Pre-conference workshops on Tuesday, October 23 will focus on robotic assembly and automated assembly which will provide an interactive educational environment for attendees to learn more about these emerging topics. On Wednesday morning Eric Pope of US Synthetic will deliver the opening day keynote address on Culture by Design, where he will discuss how creating a culture of continuous improvement was instrumental to his company’s success. Registration is now open for the 2018 event at theassemblyshow.com.

The ASSEMBLY Show is sponsored by ASSEMBLY (www.assemblymag.com), a monthly trade magazine read by 56,000 engineers and managers responsible for manufacturing and designing cars, computers, catheters, coffee makers, etc. ASSEMBLY covers the processes, technologies and strategies for joining discrete parts into finished products. The event is produced by BNP Media (www.bnpmedia.com), one of the country’s leading business-to-business media companies serving professionals across 50+ industries. For more information, visit www.theassemblyshow.com

Fluid Sealing Association Fall 2018 Meetings
2018-10-23 08:00 - 2018-10-25 17:00 (America/Chicago) | Hotel William Gray, 421 Rue Saint Vincent, Vieux-Montréal, QC, Canada
Come join us to learn about the FSA, keep up to date with the latest news in the fluid sealing and containment industry, and network with leaders in the industry!

Registration for the SMRP Annual Conference is Now Open!
2018-10-22 08:00 - 2018-10-25 17:00 (America/Chicago) | Rosen Centre, Orlando, FL, United States
Registration is now open for the 26th SMRP Annual Conference taking place October 22-25, 2018 at the Rosen Centre hotel in Orlando, Florida! See below for what this premier event offers.
Track Sessions
This year’s Annual Conference features more than 65 track sessions across seven tracks, including the five pillars of the SMRP Body of Knowledge (BoK), physical asset management and the Industrial Internet of Things (IIoT).
Workshops
Gain valuable hands-on experience from more than 30 half- and full-day workshops taking place on Monday and Thursday. The cost to attend a workshop is not included in Annual Conference registration.
Facility Tours
SMRP offers exclusive facility tours of local businesses to give attendees a “behind-the-scenes” look at facilities and the best practices employed to ensure their proper operation. The following Orlando-area sites will be visited during this year’s event:

Kennedy Space Center
Walt Disney World
Sea World
The University of Central Florida’s District Energy Center
Lockheed Martin

Keynote Speaker Captain Mark Kelly
Keynote Speaker Captain Mark Kelly
The 2018 keynote address will be delivered by the Commander of Space Shuttle Endeavour’s Final Mission, Captain Mark Kelly. With an extraordinary career of service, Mark will share the lessons learned from his extensive travels and experiences in the Navy, outer space and on the ground. From leading teams in some of the most dynamic environments imaginable, to the thrill of spaceflight, and the recovery and resilience of his wife Gabrielle Giffords, he reveals the foundations for success so you can accomplish your mission in life and work.
Early Bird pricing is available until September 7, 2018.
We look forward to seeing you in Orlando!

Register today

How to Construct and Operate a Temporary Oven
2018-10-17 12:00 - 13:00 (America/Chicago)
EVENT SPECIFICS:

Type of education: Webinar

Date of the event: Wednesday, October 17, 2018 12:00pm to 1:00pm

Central Time Zone

Instructor: Chuck Yung, EASA Senior Technical Support Specialist

This webinar will demonstrate an easy-to-build temporary oven that can be constructed in the service center or in situ. Discussion will cover:

Materials to use and where to obtain
Heating: electric, propane, or other?
Measuring winding temperature
Regulating oven temperature
Storage of the parts when not in use
Safety concerns and cautions

Target audience: This webinar will benefit service center supervisors and management.

PRICE: Member price: $59 per site

Nonmember price: $199 per site

More on mitigating surge issues
2018-10-17 10:00 - 11:00 (America/Denver) | Webinar
Wed Oct 17th 10:00am – 11:00am (MDT)

Webinar

Learn how to model and simulate surge issues such as: check valve slamming, proper relief valve modeling, and correctly use gas accumulators to suppress surges.
Register here.

Fugitive Emissions Course
2018-10-17 | George R. Brown Convention Center, 1001 Avenida De Las Americas, Houston, TX, 77010, United States
Monday, October 17, 2018 – 9:00AM – 5:00PM
George R. Brown Convention Center, Houston, Texas
Register now
Topics to be covered:

The history of fugitive emissions testing
Terms and definitions
Industry practices and implementation
Types of equipment
Manufacturing process improvements
Packing Manufacturer’s Fugitive Emission “Best Available Control Technology (BACT)”
Improvements for the future
Problems, installation and maintenance

Ideal participants:

Professionals looking for a generalized outline of fugitive emissions testing, standards and related topics
Anyone looking to renew and update their knowledge base on this subject
Anyone interested in expanding their understanding of LDAR, EPA requirements and testing procedures, and equipment used in mitigating fugitive emissions
New professionals in the valve industry without a technical or engineering background

Valve Essentials Course
2018-10-16 | George R. Brown Convention Center, 1001 Avenida De Las Americas, Houston, TX, 77010, United States
Monday, October 16, 2018 – 9:00AM – 5:00PM
George R. Brown Convention Center, Houston, Texas
Register now
Topics to be covered:

Basic introduction to flow control
Quarter-turn valves – including ball, plug and butterfly valves
Common design features – such as end connections, gaskets, bonnets, stems, stem seals, seats, backseats and trims
Self-acting valves – such as check valves
Multi-turn valves – including gate, globe, needle, pinch and diaphragm valves
Valve Applications – such as oil & gas production and transportation, refining, LNG, power generation, chemical processing and utility lines
Topics relating to valve ratings, materials, testing and more
Problems, installation and maintenance

Ideal participants:

Professionals looking for a generalized outline of valve systems and equipment
Anyone looking to renew and update their knowledge base on this subject
Valve distributors and manufacturers’ sales representatives looking to expand their understanding of the products
New professionals in the valve industry without a technical or engineering background

Hydraulic Institute 2018 Fall Conference
2018-10-15 - 2018-10-18 | Hotel Bonaventure, 900 DE LA GAUCHETIERE W, MONTREAL, QUEBEC, Canada
HI provides members with a variety of opportunities to collaborate and network with their pump industry colleagues. Pump conferences and events throughout the year offer members unique opportunities for networking, education and participation in pump standards development.

PACK EXPO 2018
2018-10-14 08:00 - 2018-10-17 17:00 (America/Chicago) | McCormick Place, 2301 S King Dr, Chicago, IL, 60616, United States
International Is The Main Event for Packaging Solutions

October 14 – 17, 2018
McCormick Place, Chicago, IL USA
In 2018, PACK EXPO International will be the world’s largest packaging trade show, featuring:

50,000 attendees from across 40+ vertical industries
2,500+ exhibitors showcasing their latest packaging solutions and launching new products
1.2 million+ net square feet of exhibits
Free educational sessions in venues on the show floor
The PACKage Printing Pavilion, this new 60,000 square-foot area showcases printing and converting technologies.

Who Attends
Attendees include high-level representatives from a wide variety of consumer packaged goods companies (CPGs), retailers and other end users.

38% are CEO/GM/senior management and plant management
22% from engineering, package development, R&D and IT
11% in production, operations, quality control and compliance
marketing, brand managers and package designers
procurement and sales
logistics and supply chain management

Industries Most Represented
Food & Beverage

Baking & Snacks
Beverage
Cereals, Breakfast Foods
Confectionery/Candy
Dairy
Fruit/Vegetables (Fresh, Canned, Frozen)
Grain, Seeds, Beans, Flour, Nuts
Meat/Poultry/Seafood
Prepared Foods
Wine/Beer/Spirits

Other Industries

Automotive
Building/Construction/Home Improvement
Chemical
Cosmetics/Toiletries
Electronics
Furniture/Fixtures
Hardware/Tools
Household Chemicals/Soap
Paper/Printing
Pet Food/Pet Care
Textiles/Apparel
Tobacco
Toys/Sports/Crafts
