Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Custom Engineering and Commitment to Customer Seal the Deal at Arizona Copper Mill

Engineering & Design
A split custom engineered Inpro/Seal Bearing Isolator provides permanent bearing protection on a Sag Mill Gearbox at a copper mine in the Southwest United States.

Custom Engineering and Commitment to Customer Seal the Deal at Arizona Copper Mill

When Bill Kuczynski from Casey Industrial noticed a large amount of oil leaking from a gearbox on a SAG mill at a client’s copper milling facility, he knew it was time to recommend a permanent sealing solution.

Kuczynski, an Outside Services Manager for Casey Industrial, regularly visits the mill to monitor equipment and advise the client on when to perform maintenance. He recalled ongoing leaks and related maintenance issues with this gearbox during the 10 years he has visited the mill. The gearbox used contact lip seals which tend to have a short and unreliable service life due to using contact with the shaft to retain lubrication. Lip seals wear at the point of contact or groove the shaft causing lubrication loss and contamination ingress.

At the mill, the rising costs associated with using low cost lip seals were becoming apparent. The lip seals needed to be replaced every three to six weeks. This repair became very time consuming and expensive specifically due to the fact that it could only take place during scheduled downtime, it required three maintenance personnel to repair and it took 3-4 hours to complete.

Furthermore, the gear box was in a confined location that limited access to the shaft, complicating the already high cost repair. Between scheduled maintenance, the leaking gearbox caused a costly, messy and hazardous problem that was also an environmental concern. Large amounts of oil were being wasted as it leaked directly to the deck below the gearbox, causing a slip hazard. In addition, workers had to add oil each shift to replace what was being lost because of the leak.

George Gillespie, General Sales Manager for Inpro/Seal, states that for many years a leaking gearbox was considered an accepted cost of doing business. He said, “I once asked a customer if he had any gearboxes that didn’t leak. The customer said that he had only one. It was sitting on a shelf in the warehouse without any oil in it.” Gillespie explained that a leaking gearbox is so commonplace that his clients often do not recognize it as a problem that needs to be corrected. “The problem is often reclassified as a preventative maintenance task. However, it’s not preventative maintenance if you fix the same problem every two or three weeks.” Stricter

SOLVING THE CHALLENGE

Gillespie explained that high oil levels and oil splash make gearboxes notoriously difficult to seal, especially in industrial rotating applications. Inpro/Seal’s sealing solution for the gearbox is based on the patented VBXX-D Bearing Isolator. This is a non-contacting, compound labyrinth seal that consists of a stator and a rotor. The stator has a large D Groove that captures oil attempting to flow down the shaft out of the housing. Through a drain port, the captured oil is channeled back to the gearbox oil sump. The rotor prevents outside contaminates from entering the gearbox by collecting them in the labyrinth design. Centrifugal force then expels the captured contaminants to the outside environment. The result is a permanent, non-contacting seal that efficiently keeps the lubricant in the gearbox. It also prevents outside contaminants, such as water and dirt, out of the gearbox bearing housing.

An operational flood in the bearing housing compounded the sealing challenge for the SAG mill gearbox. Unlike most gearboxes that splash oil into the bearings, the gearbox on the SAG mill pumped oil into the center of the double row spherical roller bearings. This ensured continuous lubrication to the bearings, but also tended to throw the oil toward the lip seal. Oil that was attempting to flow back through the bearings to return to the sump was impeded, creating an operational flood. This placed additional pressure on the lip seal and increased their failure rate. A permanent solution needed to be able to perform in an operational flood and be installed on-site without decoupling equipment.

Inpro/Seal modified a standard VBXX-D Bearing Isolator to fit the gearboxes unique challenges. This custom engineered design included:

• being split to allow seal installation without decoupling equipment

• a larger D Groove to capture the volume of oil flowing through the system

• an external drain and revamped system to return oil to the sump

According to Gillespie, Inpro/Seal’s custom-engineering expertise was the key to designing the permanent sealing solution. The Inpro/Seal team had experience with all of the factors, including size restrictions, lubrication type, bearing type, and flooded applications.

A split custom engineered Inpro/Seal Bearing Isolator provides permanent bearing protection on a Sag Mill Gearbox at a copper mine in the Southwest United States.

 

An external drain was designed to accommodate the operational flood in the Sag Mill Gearbox bearing housing.

An external drain was designed to accommodate the operational flood in the Sag Mill Gearbox bearing housing (pictured above).

A RETURN ON INVESTMENT

The time and costs associated with maintaining this gearbox were greatly reduced because the customized seal and drain back system provided a permanent sealing solution. Less maintenance results in more production time and lower costs for the SAG Mill – along with a safer working environment.

The two Inpro/Seal Bearing Isolators installed on this gearbox have been in operation for over two years. According to Kuczynski, “Everything continues to perform as expected, without any signs of a leak.” He added that Gillespie continues to check in to monitor the performance of the bearing isolator. “That’s the thing about Inpro/Seal – they don’t walk away after the install.”

Download Bearing Protection: an Overlooked Opportunity for Reliability and Efficiency Improvement

 

 

Related Articles

Engineers Week 2023

Engineers Week 2023

Engineers play a pivotal role in our everyday lives and they deserve recognition. We are thankful to have many outlets…

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact