Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AFT Impulse™ Finds Solution to Mitigate Surge Risk in Oil Pipeline

Applied Flow Technology

AFT Impulse™ Finds Solution to Mitigate Surge Risk in Oil Pipeline

An existing oil/gas pipeline ran from Colonial’s pumping station to BP’s tank in Carteret, New Jersey, USA. Both parties wanted to ensure the safety of their own systems, protecting them from high surge pressures. Steve Schade, senior process engineer at URS, used AFT Impulse to perform a study using several different
mitigation scenarios.


BP Tank Inspection – New Jersey

BP had proposed a high integrity pipeline protection system using a control valve that attempted to control pressure, while an upstream valve closed to protect the system. Modeling with AFT Impulse proved the concept.

Additional scenarios, for worst case occurrences such as power failure, were run showing high pressures in the upstream piping. This created unacceptable risk to the Colonial pipeline.


Figure 1 – AFT Impulse Model
Adding the relief valve protected both Colonial and BP piping

A relief valve was added to the model and the control valve was deleted. AFT Impulse showed that the relief valve alone would protect both Colonial and BP piping (see Figure 1). The ability to run a steady state model first to determine the coefficient was important. This coefficient could then be entered to run the transient model.

Standard AFT Impulse capabilities such as the ability to calculate transient response and the flexibility to enter different valve coefficient vs. time values were crucial in allowing URS to consider multiple solutions that would reduce risk on both sides. The new relief valve feature was a key to the final solution.

Sign up for this *Free* Webinar through Applied Flow Technology – Operational Problems of Non-Newtonian fluids

When asked about the benefits of AFT Impulse, Schade provided the following:
• “Ability to predict surge pressures for valve closing as well as for worst case scenarios.”
• ”Ability to analyze mitigation approaches other than the accumulator that is supplied with Impulse.”
• ”Ability to graph results in a format that was required by the client.”

URS was acquired by AECOM in October, 2014. Together AECOM and URS are one of the world’s premier, fully integrated infrastructure and support services firms. They design, build, finance, and operate infrastructure assets in more than 150 countries around the world—across a broad range of markets including transportation, facilities, environmental, energy, water, and government services. Their nearly 100,000 employees blend technical expertise with local knowledge to deliver innovations that have a positive physical, social, and environmental impact on our world.

AFT Impulse – Waterhammer & Surge Analysis Software  


Related Articles

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…


Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community

By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact