Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Pump Starvation: Cavitation in High Pressure Reciprocating Pumps

Maintenance & Reliability

Pump Starvation: Cavitation in High Pressure Reciprocating Pumps

The result of restricted inlet liquid flow, pump starvation can be devastating to pump systems. Starvation causes pumps to run dry, quickly decimating the pump plungers, packing and valves.

Causes of Pump Starvation

Below are some of the most common causes of starvation in reciprocal pumps.

  • Low-level tanks; not enough tank head
  • Inadequate piping, whether it’s too long, has too many 90° angles, or includes pipes that are too small or too large in diameter
  • A feed pump that is too small or needs maintenance
  • A pulsation dampener that is not present or is in need of repair
  • A suction valve that is too heavily sprung

Results of Pump Starvation

One of the most common results of pump starvation is cavitation — the formation of bubbles or cavities in a liquid. This develops in areas of relatively low pressure.

The imploding or collapsing of these bubbles can often cause significant damage to the pump as the pump shakes and the valves begin to clatter. Pump performance quickly falls off, and the discharge gauge will begin to fluctuate wildly and eventually fail.

Resolving Pump Starvation

Correcting the piping is one way to remedy pump starvation, but if the problem can’t be resolved because of time or financial constraints, a partial fix can be done by installing Triangle Pump Components’ Cavitation Package (CavPack™), which includes a suction valve and discharge valve.

The suction valve design — V7H (light spring, low lift) — is the most effective valve for low net positive suction head applications in which plunger pumps are starved of incoming fluid on the suction side.

The V7H allows in as much fluid as possible. This lightweight metal valve disc allows for exceptional service life, significantly outlasting other leading styles of pump valves. To help maintain its long life span, the low-sliding friction and inertia of the V7H’s disc keep power consumption to a minimum while in use.

Meanwhile, the discharge valve design — V7F or V7FD (heavy spring, high lift) — allows out as much fluid as possible. The taller profile of the V7F also provides a spill area for fluid.

Learn More

Check out our video for more tips on treating pump starvation. Or, to discuss how Triangle Pump Components can help solve your reciprocal pump valve and plunger problems, contact the team today.

Related Articles

Sulzer Cost effective sustainable fuel production

Cost effective sustainable fuel production

Benchmarking Market Report highlights cost-leadership of Sulzer Chemtech BioFlux Process Technology for Renewable Fuels production BioFlux® process technology for renewable fuel…

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…


Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community

By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact