Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Products
Stan-Cor Series

Stan-Cor Series Pump

  • Designed by the process industry for the process industry
  • Cost-effective, rugged and durable design
  • Smooth, full-curve performance

Applications
Stan-Cor Series pumps are specifically designed to handle abrasive, corrosive, dirty and reclaim process fluids like no other pump can:

  • Acid recovery
  • Bleaching
  • Chlorinated hydrocarbon
  • Grit removal
  • Hydrochloric acid
  • Hydrofluoric w/lime
  • Lime slurries
  •  Paints
  • Pickling solutions
  • Plating solutions
  • Semi-conductor waste water
  • Sodium hydroxide
  • Spent caustics
  • Sulfuric acid

Stan-Cor SeriesDesign Benefits

  • Solid Kynar* pump head for chemical compatibility and excellent abrasion resistance\
  •  Concentric casing design for better flow patterns than other centrifugal pumps– less turbulence, longer seal life, reduced shaft deflection
  • Handles high temperatures up to 250˚F
  • Compact design features including heavy-duty drive shaft, adjustable bearing supports, and large-capacity oil bath to ensure low maintenance and durable performance for the toughest fluid applications
  • Back pull-out design for easy servicing
  • Handles solid sizes up to 9/16” maximum

Stan-Cor Patented Concentric Casing Advantages

Unlike volute-type centrifugal pumps, the Stan-Cor pump uses a unique concentric design that provides a constant, equal distance between the pump casing and the impeller at all times during pump operation. This greatly reduces turbulence and vibration, thereby extending the life of the mechanical seal and bearings.

In a conventional volute casing pump, water turbulence and eddies are created as the impeller passes the
restrictive cut water area in the casing. These hydraulic imbalances in turn cause the drive shaft to deflect, which increases the loading on the bearings, and leads to premature mechanical seal failure. At near shut-off, the bearing loading is extremely high.

Stan-Cor SeriesThe Stan-Cor concentric casing design eliminates these excessive hydraulic imbalances. It allows the pump to run anywhere between a few gallons per minute and full flow without undue shaft deflection. Moreover, the design allows the Stan-Cor pump to handle abrasives much better than standard models.

The sharp, restrictive cut water area of most pumps is the focal point for corrosion and erosion. It is the place where abrasives first attack a pump. With lined pumps, the thin liner is easily abraded away and the metallic backing exposed to the corrosive and abrasive forces of the product being pumped. The Stan-Cor concentric casing design, coupled with its solid homogenous non-metallic component, eliminates this problem area.

Stan-Cor Catalog

Product Information Request

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact