Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Non-Clog Pumps for the Van Grouw Dairy

Crane Pumps & Systems
non-clog demersible pump Van Grouw Dairy

Non-Clog Pumps for the Van Grouw Dairy

Life Before Deming Chopper
The Van Grouw Dairy, established in 1989 by Rob Van Grouw, is home to approximately 3,000 head of cattle with 2,000 of those cows milking at any time. The dairy sits at the base of Sequoia National Park in Tulare County, and spans over 100 acres. It employs 12 people and averages sales around $1.1 million annually. The majority of Tulare County’s economy stems from dairy farming, bringing in over $1 billion annually in revenue. Tulare is also the site for the World Ag Expo, which is the world’s largest agricultural exposition.

Pump Station Details
The 3,000 cattle split their time between a pasture and large barns, which require regular cleaning. When the barns are washed down, the water drains to a large lagoon, measuring around 80,000 square feet. This water is mostly manure and hay, but often can include sticks, twine and rocks. Van Grouw Dairy is approximately 30 years old, and the lagoon has been on the farm since its founding. This lagoon is pumped into the farm’s fields to act as a fertilizer, which is accomplished with a single pump. The crops grown in these fields are then used as feed for the cattle.

Over its 30 years of operation, Van Grouw Dairy has utilized turbine pumps and non-clog pumps. The original submersible turbine pump had great difficulty with the high solids content, which caused Van Grouw to replace the turbine with a non-clog pump. The non-clog pump had to be removed from the station about once per year, for various reasons. The existing pump experienced clogging issues, an overheating motor, and seal failures. The one common theme for each failure was that the pump was expensive to repair and maintain. The final time the non-clog pump was pulled, Rafael Padilla, who maintains the dairy’s equipment, noted that “the pump was just too expensive to repair.”

Each time the non-clog pump needed to be removed from the lagoon, it cost the dairy about $3,000 in labor alone – not including the cost of downtime at the dairy or any new parts required.

In April 2018, Van Grouw Dairy worked with Willitts Equipment & Engineering Co, a local pump service provider, and Preferred Pump, the local Deming distributor, to purchase a 6” 30HP Deming Chopper pump to replace the failed non-clog pump. Since installation, the Deming Chopper pump has operated better than any of the previous pumps. Gary Cowan of Willitts Equipment pointed out that they were able to use the existing rail system, which made the installation efficient and cost effective. Due to its performance since installation, the Deming Chopper has saved the Van Grouw Dairy a significant amount of money.

 

Demersible Chopper Pumps

Related Articles

Crane variable speed frequency drives Quick Start Guide

VFD Quick Start Guide

Using variable speed/frequency drives on wastewater pumps can be tricky, but if the drives are sized and programmed properly, they…

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact