Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Sithe Chopper Pump Solution For Heber Springs, AR

Crane Pumps & Systems
Crane Chopper Pump Solution for clogging in Heber Springs

Sithe Chopper Pump Solution For Heber Springs, AR

Application Overview Of Chopper Pump 

Heber Springs, Arkansas is home to approximately 7500 people and 29 lift stations. The area is a popular vacation spot, which means the population can spike in the summer. Greers Ferry Lake and the Little Red River’s excellent boating and fishing bring people from all around.

Pump Station Details

The Southridge Village lift station is the closest to the wastewater treatment plant, and is particularly troublesome. The inflow comes from residences, an assisted living facility, hospital and multiple restaurants, resulting in a wide array of challenging solids. The station sees stringy solids, like disposable wipes and mop heads, mixed with oils and grease. The station was constructed in 2000, and has seen a myriad of different pumps over it’s life. Prior to the more recent issues, the pumps were replaced about every 3 years. However, in the past two years, the station went through four different pumps due to clogging issues. The city tried grinders, non-clog and vortex pumps, and every pump would clog about 2-3 times per week. Each clog event would require a two man team around 8 hours to manually pull the pump and unclog by hand, which could cost approximately $600 a week.

Installation

Heber Springs Water and Wastewater Utility approached JR Stewart Pump & Equipment Inc, the local Barnes representative, for a new solution to their clogging issues. In May of 2018, Heber Springs purchased and installed a Barnes 4” 5HP Sithe Chopper Pump to replace one of the pumps in the duplex lift station. The installation was easy, since the Sithe chopper was able to utilize the existing rail system. Since installation, the pump has not experienced a single clog or issue, and its sister pump has not either. Because of the success of this station, the City has already ordered another Sithe chopper for a troublesome lift station with a large department store. This new station has seen a recent influx of face masks and latex gloves due to the COVID-19 Pandemic. Paul Graham, the General Manager of the Heber Springs Water and Wastewater Utility noted that he would eventually like to convert all lift stations to the Sithe Chopper, because it gives them peace of mind.

Key Takeaways

Pain Points

• The existing pumps clogged multiple times a week, causing headaches for the Wastewater Utility.
• Each clogging event was typically accompanied with overheating motors, which caused tripped breakers and further maintenance.

Benefits

  • Heber Springs installed a 5HP Sithe Chopper, and has not had to service the lift station since.

To learn more on the Sithe Chopper Pump click HERE or HERE.

Related Articles

Crane variable speed frequency drives Quick Start Guide

VFD Quick Start Guide

Using variable speed/frequency drives on wastewater pumps can be tricky, but if the drives are sized and programmed properly, they…

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact