Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

25 Pressure Seals Replaced in Record Time

EGC

25 Pressure Seals Replaced in Record Time

In April of 2013, Industrial Valve reduced installation time from fourteen to six hours on pressure seals ranging from 900 to 4,500 pounds using the VSG Pro, a high-density graphite bonnet seal from EGC Enterprises.

Typically, a power plant shuts down a couple of times a year to allow safety and maintenance items to be performed. In the case of Georgia Power, a Southern Power facility located in Carrollton, 25 bonnet seals had to be replaced, and Industrial Valve, a mobile Alabama company, was given the contract. As is typical in all power plants, Industrial Valve had only nine days to complete the operation.

Nine days may sound like a lot, but it’s not. Southern Power is a gas-fired, combined-cycle steam plant, and the valves are everywhere, sometimes hovering three stories high to being located underground. In manual repair, they range from 900-pound pressure seal valves to 4,500; and in sizes, as small as a 4-inch diameter seal to as big as 24 inches.

Fortunately, each valve came with an EGC enterprises VSG pressure seal making the replacement go a lot faster. “We called EGC and pre-ordered the VSG Pro pressure seal,” said Rusty Franklin, Sales Manager for Industrial Valve. “Normally we’d have to work round the clock to change that many pressure seals in nine days. But the VSG Pro makes the installation a whole lot simpler.”

The VSG Pro, made of high-density graphite, provides a mechanism for anti-extrusion and requires no production tooling. The VSG Pro is manufactured through an innovative process whereby time-to-build is greatly reduced, offering a standard lead time of 48 hours.

“It’s the forgiveness of the seal that won me over,” says Franklin. When dealing with a metal seal, “we spent hours machining pressure seal stuffing boxes, and it was very time consuming. With the VSG, they come pre-made, and if the pressure seal cavity doesn’t look good, we take Scotch-Brite and clean it. It handles nearly any imperfection.”

Bonnet seals form a barrier to prevent the venting of steam from the valve. Typically, a silver plated metal seal is used. The metal seal installs easily, but during its operation it can actually become an integral part of the valve making it extremely difficult to remove and requiring re-machining.

Says Franklin, if Industrial Valve is replacing a metal seal, “it takes four hours to make a pressure seal doughnut on a 16-inch valve and another four hours to machine it, and that’s a lot of time to spend when you only have nine days to do the job.” According to Franklin, the VSG Pro installs in six hours, and that’s everything from bonnet removal to replacement to valve reassembly.

The VSG Pro is unsurpassed in its ability to seal and is competitive in cost with its metal counterpart. Its ease of removal means you’ll never have to re-machine the valve again. Says Franklin, “the VSG Pro has made a believer out of me, and I can see how they would make the metal seal obsolete.”

 

Corporate Profile

EGC is a recognized world leader in the engineering and manufacturing of graphite composites for high-temperature applications in sealing or thermal systems management. The EGC website can be accessed at https://egcgraphite.com/.

Related Articles

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact