Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Mag-Drive Pumps Balance Sustainability and Performance to Meet API 685 Requirements

Flowserve
Flowserve Innomag mag drive pump

Mag-Drive Pumps Balance Sustainability and Performance to Meet API 685 Requirements

By: Flowserve

To meet the stringent requirements pertaining to volatile organic compounds (VOCs), many petrochemical and oil and gas companies have turned to sealless pumps. These pumps are considered more sustainable than mechanical pumps because they do not use seals, which can fail and allow hazardous fluids to leak into the environment.

Using sealless pumps to meet strict sustainability requirements often meant sacrificing hydraulic performance and reliability, but this trade-off is no longer necessary when using sealless pumps that meet the API 685 standards for centrifugal pumps.

Sealless mag-drive pumps offer a way to balance sustainability and performance needs in environmentally critical applications. Extremely versatile, they provide outstanding leakage protection and can handle the high pressures, temperatures and aggressive/toxic media often found in the oil and gas and hydrocarbon industries.

The API 685 standard

The API 685 standard addresses the minimum requirements for sealless pumps manufactured for heavy-duty petrochemical and oil and gas applications. It applies to mag-drive and canned motor pumps and is very similar to the API 610 standard, one commonly associated with centrifugal pumps in the petroleum, petrochemical and natural gas industries.

The American Petroleum Institute recommends applying the 685 standard for applications when conditions exceed any of the following:

  • Discharge pressure of 1900 kPa (275 psig)
  • Suction pressure of 500 kPa (75 psig)
  • Pumping temperature of 150°C (300°F)
  • Rotative speed of 3600 rpm
  • Rated total head of 120 m (400 ft)
  • Impeller diameter of 330 mm (13 in)

Designed for sustainability and reliability

Sealless mag-drive pumps meet the higher sustainability requirements of the API 685 standard through a variety of innovative design features, including:

Containment shell prevents fluids from leaking into the environment
API 685 mag-drive pumps use a containment shell made from alloy C4, a nickel-based material, for high-efficiency performance and high corrosion resistance. Alloy C4 containment shells prevent process fluids from escaping from the pump and leaking into the environment. API 685 mag-drive pumps also feature a secondary containment system behind the shell and backup renewable rings that provide an additional layer of leakage protection.

Internal flushing system improves reliability
Instead of using an external flushing system, which may fail under aggressive conditions, API 685 mag-drive pumps leverage an internal flushing path designed to efficiently cool the magnets and lubricate sleeve bearings. The process fluid is fed from a high-pressure area behind the impeller to the magnetic coupling, and a self-cleaning filter helps prevent contamination.

Reduced maintenance and associated costs
In addition to features designed for sustainability and reliability, API 685 mag-drive pumps can also reduce maintenance labor and costs. Some of these pumps utilize a standard back pullout design, which simplifies general maintenance and inspections because the casing stays in-line and the piping connections remain intact.

This contained back pullout design also makes drive-end maintenance easy. The process fluid remains entirely confined, which eliminates the need to drain or purge the pump. Further, maintenance personnel aren’t exposed to potentially harmful process fluids.

Ideally suited for critical applications

API 685 mag-drive pumps are 100% leakage free, providing a sustainable alternative to other pumps. Because of their innovative design features, these pumps safely handle hazardous and volatile fluids in extreme conditions, making them ideal for use in petroleum, petrochemical and natural gas applications where companies have to balance performance, reliability and sustainability.

Learn more about Flowserve API process pumps at https://www.flowserve.com/en/products/pumps

 

Related Articles

Flowserve IIoT Solutions for Seals (4)

IIoT Solutions for Seals

Learn about the conditions inside mechanical seals It is often the mechanical seal performance data that is the best and earliest…

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact