Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Retiring baby boomers cause massive shortage in trades jobs… What’s the best solution?

Industry News
Sulzer Retiring baby boomers cause massive shortage in trades jobs

Retiring baby boomers cause massive shortage in trades jobs… What’s the best solution?

By: Sulzer

By David Fasnacht – Customer Training Manager, Sulzer Pump Services (US) Inc.

As more baby boomers continue to retire in 2021, it is reported that 62% of companies are struggling to fill critical, skilled technical trade positions, such as millwrights, machinists, mechanics, welders, operators, pipefitters, and electricians. Thirty-one million skilled technical trade positions will be vacant by the end of 2021, per the 2020 US Labor Department Report.

Skilled trades’ people are key components to the USA workforce and are vital to the economy. The need for skilled technical trade labor training is only becoming more evident. Today’s maintenance facilities manufacturing facilities, power plants, pipelines, water processing plants and chemical plants have employees with decades of experience retiring with their intimate knowledge of the equipment and processes.

Sulzer Understanding the technical aspects of pump operation can improve operator performance

Understanding the technical aspects of pump operation can improve operator performance

These plants supply us with electricity, water, gas and diesel for our vehicles and heat in our houses, just to mention a few necessary living requirements. Jobs that supply our everyday needs cannot be outsourced. In a perfect world, the trade’s person retiring would be paired with their replacement, for six months to a year, to learn all the tricks of the trades that have been mastered by the senior employee over their decades of employment.

Entry-level training

Due to cost constraints, companies rarely invest in training new employees prior to the retirement of their predecessors. The need for skilled, entry-level employees is becoming so great that employers are starting to look at many ways to find qualified personnel.

Some companies are starting to work with the local trade schools in their areas. These trade schools have substantial access to manufacturing and processing plants in their area to develop the specific training required for manual maintenance operations and automated operations at these facilities.

Companies may need to revisit company-specific apprenticeship/mentorship programs to ensure they have a qualified employee base. In the past, companies had training programs available to interested, new talent. One of the challenges industries are being faced with is the shallow talent pool from which to draw a skilled trades’ person. Companies may receive 400 applications but only six of those applicants are qualified for the skilled labor trade job available.

Sulzer Broadening the knowledge base of the younger generation

Broadening the knowledge base of the younger generation helps to retain valuable information within the organization

Real-world skills

Training programs can range from a 30-minute online seminar to two to five-year programs / mentorships. The goal of the two to five-year programs / mentorships is to have a skilled technical trades’ person with the company’s required specific skillsets.

The reality is trade schools do not offer many classes for the manual processes and the real-life skills needed in these manufacturing facilities. Most of the chemical plants, maintenance facilities and refineries have little use for automated machining of parts. The facilities may need to machine one or two parts, not thousands, thus making manual machining processes necessary. This creates a disconnect between outside/third-party training offered and the actual needs of the facilities.

New employees need exposure to and training for all aspects of the processes and the equipment in the shortest time possible, which can be achieved by tribal knowledge – retiring employees and training classes.

From the viewpoint of a skilled technical trades’ person, already working in the industries mentioned, the training type and timing is of the utmost importance. The employers must invest in the new employees’ internal training, so the company can perform efficiently and safely and maintain a healthy profit margin. Internal training can also supply the employees with critical information and hands-on experience, thus decreasing the learning curve and minimizing unnecessary mistakes.

Filling the knowledge gap

Lack of training can work in two ways in a manufacturing plant. For example – operations personnel may not understand how running a centrifugal pump incorrectly increases the frequency of repairs, which could otherwise be avoided; in addition, maintenance personnel may not understand why they are repairing the equipment so often. This lack of knowledge can cost the employers excessive, unnecessary downtime, loss of production and the added maintenance costs, leading to significant revenue losses.

The rate of return for a company investing in their employees’ training is hard to gauge, but training is extremely beneficial to the maintenance of the facility while keeping downtime and unnecessary repair costs to a minimum. Every training session, whether it is a 30-minute, online seminar or a three-day, face to face seminar with hands-on training, can have an enormous rate of return for the facility, thus decreasing costs and increasing efficiency as well as safety.

If a company were to send a trades’ person to attend one subject-specific class, once a year for five years, pertaining directly to the equipment supported, tremendous benefits and cost savings will be achieved in production and safety. Ongoing training programs can ensure staff are well qualified for their positions.

Sulzer Investment in training is vital for the support of new employees and their development within the company

Investment in training is vital for the support of new employees and their development within the company

Becoming qualified

Take for example an employee who is personally responsible for the successful installation, rebuilding and maintenance of centrifugal pumps. The most benefit would be obtained by attending a centrifugal pump fundamentals course, which supplies a solid foundation of installation, operation and maintenance of rotating equipment. This also satisfies the OSHA Codes of Federal Regulations (CFR) 1910.399 requirement. OSHA defines a “qualified person” as “one who has received training in and has demonstrated skills and knowledge in the construction and operation of electrical, equipment and installations and the hazards involved.”

When applied to pumps and systems, a qualified person can demonstrate relevant skills and knowledge related to the installation, operation and maintenance of such equipment and systems. In addition, the employee will receive the safety training needed to identify and avoid hazards, including the proper identification and use of personal protective equipment and proper lockout/tagout procedures. Instructor-led training teaches the basics along with the safety knowledge needed to meet OSHA’s “qualified person” definition.

The learning curve can be exceptionally steep when people begin their trades’ careers. Mistakes are not acceptable. Companies must invest in their employees if they expect them to perform at the elevated level needed to compete in today’s business world.

Employee investment

Training is often the first thing to be cut in tough economic times, making for enormous ramifications, considering 20% to 60% of the skilled trades’ employees in most facilities have been hired in the last five years.

Businesses must invest in the talent that they currently employ and plan on hiring. Employee investment will provide years of successful operations with a minimal amount of growing pains, as the baby boomers retire.

The shortage of skilled trades’ workers today is unprecedented. Therefore, training is critical for the future success of a facility. Employers must supply the training necessary, as the hiring pool is young and inexperienced, which will give the companies the best chance for a smooth transition from the retiring employees to the new hires.

There has never been a better time to be an ambitious, well-trained, skilled technical trades’ person. Being proactive instead of reactive with training is necessary for both the employer and employee in today’s times.

About Sulzer
Sulzer is a global leader in fluid engineering. We specialize in pumping, agitation, mixing, separation and application technologies for fluids of all types. Our customers benefit from our commitment to innovation, performance and quality and from our responsive network of 180 world-class production facilities and service centers across the globe. Sulzer has been headquartered in Winterthur, Switzerland, since 1834. In 2020, our 15’000 employees delivered revenues of CHF 3.3 billion. Our shares are traded on the SIX Swiss Exchange (SIX: SUN). www.sulzer.com. The Pumps Equipment division specializes in pumping solutions specifically engineered for the processes of our customers. We provide pumps, agitators, compressors, grinders and screens developed through intensive research and development in fluid dynamics and advanced materials. We are a market leader in pumping solutions for water, oil and gas, power, chemicals and most industrial segments.

Throughout the Americas, Sulzer provides cutting-edge parts as well as maintenance and repair solutions for pumps, turbines, compressors, motors and generators. We service our own original equipment as well as third-party rotating equipment operated by our customers. Our technology-based solutions maximize reliability and lifecycle cost effectiveness.

For more information on Sulzer, visit www.sulzer.com

Related Articles

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact