Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Danfoss opens customer Application Development Center in Florida

Danfoss
Danfoss

Danfoss opens customer Application Development Center in Florida

Grand opening celebration marked the official unveiling and launch of the new laboratory, R&D facility that will help manufacturers test air-conditioning systems for compliance with regulations and standards.

Danfoss, a leading manufacturer of high-efficiency electronic and mechanical components, controls, compressors, and variable frequency drives for air-conditioning, heating, refrigeration, industrial, and water systems, this week celebrated the grand opening of its “Engineering Tomorrow” Application Development Center in Tallahassee, Florida.

DanfossA state-of-the-art laboratory, Danfoss’ new customer Application Development Center features three fully-automated test facilities capable of accommodating residential and commercial air-conditioning and heat pump equipment, including rooftop units, from 1.2 to 50 tons and air-cooled chillers up to 150 tons. Additionally, the lab will be able to test mildly flammable refrigerants at global nameplate voltages, with real-time data acquisition and performance analysis.

“Danfoss has a long tradition of innovation,” remarked John Galyen, president, Danfoss North America, during the grand opening celebration. “This new Application Development Center affirms our commitment to helping our customers Engineer Tomorrow and advance energy efficiency and climate-friendly solutions.”

“One of the major drivers behind this significant investment is the increasing federal regulations and testing requirements impacting the HVACR industry, including aggressive energy-efficiency standards from U.S. Department of Energy and new targets for environmentally-friendly, low-GWP refrigerants from U.S. Environmental Protection Agency,” Galyen explained. “This Application Development Center will enable us to help our industry prepare for the transition by providing much-needed lab capacity to ensure compliance with evolving and future requirements.”

Globally, Danfoss has a network of Application Development Centers to provide industry partners with a collaborative laboratory environment and the application expertise necessary to meet challenges.

“Our objective is to make each of our Application Development Centers a place where local Danfoss application experts work with our customers in a collaborative, innovative environment that accelerates technology and propels business,” said Stefan Pietrek, senior director – global applications, Danfoss. “This ADC is designed to support testing specifically for the North American air-conditioning market.”

Gregory Handzel, manager of the Application Development Center, further explained that the collaboration facilitated by the ADC will help customers improve performance through system-level testing. “This lab enables engineering teams to validate new concepts and develop products and solutions that solve key challenges in today’s market.”

The Tallahassee Application Development Center will also serve as a competence center for Danfoss research and development activities.

Danfoss

Danfoss receives key to the city from Tallahassee Mayor Andrew Gillum. Pictured left to right: Kim Fausing, Executive Vice President and COO, Danfoss; John Galyen, President, Danfoss North America; Ricardo Schneider, President, Danfoss Turbocor Compressors; Tallahassee Mayor Andrew Gillum; Jorgen M. Clausen, Chairman of the Board, Danfoss.

Danfoss receives key to Tallahassee city

During the ceremony, Tallahassee Mayor Andrew Gillum provided Danfoss with a key to the city to signify the company’s investment in the city to drive innovation and efficiency. “The team at Danfoss has made and continues to make tremendous investments in our community, that not only bring good paying jobs and economic growth, but a level of engagement that is helping Tallahassee define itself as a 21st century city,” said Mayor Gillum. “We are grateful for their partnership and collaboration, and look forward to our continued work together.”

Following a tour of the Application Development Center, attendees joined Danfoss and Florida Agricultural and Mechanical University (FAMU)/Florida State University (FSU) for an innovation demonstration. ”The Application Development Center will provide the multidisciplinary infrastructure needed for HVAC, where together with our customers and research institutions like FAMU/FSU, we can accelerate innovation and create greater value for all stakeholders,” commented Ricardo Schneider, president of Danfoss Turbocor Compressors.

The grand opening celebration was held on Tuesday, June 27, and was attended by Danfoss’ Executive Committee, regional management, customers, and local officials. Jorgen M. Clausen, Chairman of the Board, and Kim Fausing, who has served as Executive Vice President and COO and takes over as CEO on July 1, inaugurated the facility with an official ribbon-cutting ceremony.

Danfoss engineers technologies that enable the world of tomorrow to do more with less. We meet the growing need for infrastructure, food supply, energy efficiency and climate-friendly solutions. Our products and services are used in areas such as refrigeration, air conditioning, heating, motor control and mobile machinery. We are also active in the field of renewable energy as well as district heating infrastructure for cities and urban communities. Our innovative engineering dates back to 1933 and today Danfoss is a world-leader, employing more than 25,000 employees and serving customers in more than 100 countries. We are still privately held by the founding family. Read more about us at www.danfoss.com.

Related Articles

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact