Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Cost-Effective Wastewater Pumping in Coal-Mining Applications

Industrial Flow Solutions
IFS Cost-Effective Wastewater Pumping in Coal-Mining Applications (2)

Cost-Effective Wastewater Pumping in Coal-Mining Applications

Coal-mining operators rely on submersible slurry pumps to handle punishing conditions. Among the harshest environments for pumps, coal slurry quickly abrades their metal components. Inferior pumps lower mine output and increase operating costs. How can you extend pump lifespan and raise job productivity? Below Industrial Flow Solutions discuss the most cost-effective wastewater pumping equipment for coal-mining applications.

Coal-Mining Pump Issues That Increase Your Costs

There are three coal-mining issues that plague slurry pumps and shorten their lifespans.

Abrasive Solids

Coal itself is a highly abrasive material. Coal slurry is a muddy, acidic mixture of water, coal chunks, coal fines, dust, dirt and rocks. Coal fines are coal particle size usually less than one-sixteenth of an inch. These are especially abrasive to a pump’s internal components. These materials combined wreak internal havoc on pumps, causing clogs and failures.

Acid Mine Drainage

Acid mine drainage is also known as acidic abrasion or dilute sulfuric acid. Coal-mining (and mining for other sulfide materials) forms this highly acidic water. It causes serious wear to submersible slurry pumps and other metal equipment.

Slugging

Some pumps used for heavy duty slurries only dewater the slurry. This leaves the solids behind to accumulate around the pump. When the edge of the pile collapses, a high concentration of solids enter the pump simultaneously. “Slugging” creates strain on the pump impacting its performance and risks job productivity.

Select the Right Pump to Reduce Costs

To mitigate the issues above, you need durable submersible pumps that are proven to withstand the harsh coal-mining environments. The features below are the starting point for what you need in a reliable pump that will lower your costs. Work with a pump supplier who has experience with coal-mining applications to fine tune additional pump features based on your specific needs.

Hard Metal Slurry Pumps

Hard metal pumps offer better abrasion resistance than cast iron pumps (even rubber-lined). Hardened high-chrome iron protects the entire component. Rubber-lined pump components offer some protection, but only to the depth of the liner. Better protection helps your pump last longer with fewer repair and maintenance needs.

As an example, BJM constructs KZE and KZN Series submersible slurry pumps with hard metal to handle these tough applications. The impeller, agitator, and wear plate feature 28% high chrome iron to resist the abrasives that decrease pump performance.

IFS Cost-Effective Wastewater Pumping in Coal-Mining Applications (1)

Agitators

To help prevent solids buildup, some slurry pump models feature a built-in agitator. The agitator mixes the liquid around and beneath the pump to keep solids from settling. This helps the pump to continue operating and prevents pump clogs.

Submersible pumps without agitators risk blockage from slugging. This leads to increased downtime from pump failures.

As with pumps, look for agitators made of hard metal to better withstand abrasives and last longer.

Seal-Fail Circuits

Seal-fail circuits are helpful in prolonging the life of the pumps. A seal-fail circuit, such as BJM’s Seal Minder™, will alert operators if moisture enters the pump chamber. This allows users to maintain the equipment before water damages the pump motor.

What’s Your Next Step?

Contact an expert who is familiar with pumps specifically built for coal-mining and the type of slurry you’re pumping.

Industrial Flow Solutions specializes in the design, manufacturing, sales and service of pumping and fluid management solutions for harsh, rugged environments. With OverWatch™ direct in-line pump systems, BJM Pumps® products and Stancor® Pumps and Controls, they offer a comprehensive portfolio of submersible and direct in-line pumps and controls ideal for industrial, commercial and municipal applications.

IFS offers problem-solving solutions for Industries including Mining & Materials, Food Processing, Construction, Commercial Building Trades, Municipal Wastewater, and Power Generation/utilities. Our years of application and design engineering experience provide you the assurance that you are getting the best-fit pump for your application.

Contact one of the IFS Application Engineers today to learn more. 860-631-3618 | flowsolutions.com

Related Articles

Related Whitepapers

Expansion Joint Expertise Improves Industrial Wastewater System Reliability

The majority of industries have wastewater treatment plants. Government agencies and local governments require these facilities to meet pretreatment requirements. Pretreatment rules were enacted to prevent…

How to Decrease Oil Changes with Bearing Isolators [Inforgraphic]

Learning how to decrease oil changes can be time- and money-saving. Oil life can be long if contamination is eliminated, which is easier said than…

Synchronous Machines Are The Optimal Choice For Heavy Industry

TECO-Westinghouse experience assures superior performance and reliability For over a century, Westinghouse has been the pacesetter in the design and production of electric machines for heavy…

Why FLEXXORs Are Designed Differently

J. Hilbert Anderson, President of Coupling Corporation of America, discusses some of the reasons why FLEXXORs are designed differently from all other flexible couplings, and…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact